Sechang Instrument Co. Ltd. — your trusted partner in precision water quality measurement instruments and field test kits.

Arsenic (As) is one of the most dangerous naturally occurring contaminants in drinking water worldwide. The WHO guideline and most national drinking water standards set the maximum permissible level at 0.01 mg/L (10 µg/L). Exceeding this threshold poses serious long-term health risks including skin lesions, cardiovascular disease, and cancer.

Whether you are a field inspector, environmental engineer, or water utility operator, the central question is always the same: should I use a portable arsenic test kit or send samples to a laboratory for ICP-MS analysis? This guide breaks down the comparison so you can make the right choice for your situation.

Understanding the Two Measurement Methods

1. Portable Arsenic Field Test Kits

Field test kits — such as those in the CHEMetrics CHEMets® series — use colorimetric or strip-based reactions to detect arsenic concentrations in water samples on-site. The most common chemistry is the molybdenum blue or arsine gas / silver diethyldithiocarbamate (AgDDTC) method.

• Detection range: Typically 0.005–0.5 mg/L (varies by kit)
• Test time: 5–15 minutes per sample
• Equipment needed: Test kit, color comparator or portable photometer
• Cost per test: $2–$8 per sample
• Portability: High — no electricity or laboratory infrastructure required

2. Laboratory ICP-MS (Inductively Coupled Plasma Mass Spectrometry)

ICP-MS is the gold-standard analytical method for trace metal quantification, providing extremely low detection limits (sub-µg/L) and high accuracy across a broad range of elements simultaneously.

• Detection limit: 0.001 µg/L or lower
• Test time: 1–5 business days (including sample transport and lab processing)
• Equipment needed: Specialized laboratory with ICP-MS instrument
• Cost per test: $30–$150 per sample (laboratory fee)
• Portability: None — samples must be shipped to a certified lab

Head-to-Head Comparison

When to Use a Field Test Kit

Choose a portable arsenic field test kit when:

• You need immediate screening results on-site (e.g., emergency response, initial site survey)
• You are monitoring multiple groundwater wells across a wide geographic area and need rapid triage
• Budget is limited and you need to prioritize which samples require laboratory confirmation
• You are conducting routine compliance checks and need a quick pass/fail against the 0.01 mg/L threshold
• Remote locations make laboratory sample transport difficult or time-sensitive

Practical example: A rural water utility in Southeast Asia monitors 50 community wells monthly. Using field kits to screen all wells and sending only the flagged samples (those above 0.005 mg/L) to the ICP-MS lab reduces laboratory costs by up to 70% while maintaining full regulatory coverage.

When to Use ICP-MS

Choose laboratory ICP-MS analysis when:

• Results are needed for official regulatory reporting or legal compliance documentation
• The arsenic concentration is suspected to be near or below 0.005 mg/L (below most field kit detection limits)
• You need to analyze arsenic speciation (As(III) vs. As(V)) for treatment optimization
• A comprehensive water quality panel is required (simultaneous detection of lead, cadmium, mercury, etc.)
• You need to verify or dispute a field test result

The Recommended Two-Step Workflow

For most water quality programs, the optimal approach combines both methods:

1. Step 1 — Field Screening: Use a portable arsenic test kit to screen all sample points. Flag any sample exceeding 0.005 mg/L (half the regulatory limit, for safety margin).
2. Step 2 — Laboratory Confirmation: Send flagged samples to a certified ICP-MS laboratory for precise quantification and regulatory documentation.

This workflow reduces laboratory costs, accelerates decision-making in the field, and ensures that no high-risk sample is missed.

Key Interferences to Watch Out For

When using field test kits for arsenic, be aware of these common interferences:

• Phosphate (PO₄³⁻): High phosphate concentrations can cause false positives in some colorimetric methods
• Hydrogen sulfide (H₂S): Can interfere with the arsine generation step — pre-treat samples from sulfide-rich groundwater
• Sample pH: Optimal performance is typically pH 4–8; acidify samples outside this range
• Turbidity: Filter turbid samples before testing to avoid color interference

Selecting the Right Arsenic Test Kit

When choosing a field arsenic test kit, consider:

• Detection range: Ensure the kit can detect at or below 0.005 mg/L (half the WHO limit)
• Method: Colorimetric kits (CHEMets) offer convenience; strip kits are faster but less precise
• Reagent shelf life: Important for field deployment in remote areas
• Photometer compatibility: Some kits work with portable photometers for improved accuracy over visual comparison

Sechang Instrument stocks a range of water quality field test kits and analytical instruments suitable for arsenic monitoring programs. Our specialists can recommend the right combination of field and laboratory tools for your specific application.

📞 Contact Sechang Instrument for product selection assistance, bulk pricing, and technical support for arsenic water quality monitoring programs.

View Arsenic Measurement Products →

Request a Quote

▶ Sechang Instruments — Get a Quote

• Wide range of water quality, flow, gas detection, and thickness measurement instruments
• Expert consultation from product selection to installation